> page 4

Price List - Page 4

HP range	Max RPM	Model	Description	List Price	Our Price
According to duty	—	—	—	—	—
85 to 100	2800	N45-100	4-Cyl 4.5 litre N/A	£11,228	£8,646
125 to 150	2800	N67-150	6-Cyl, 6.7 litre N/A	£12,672	£10,527
180 to 220	2800	N67-220	6-Cyl 6.7 litre TC	£19,112	£14,716
230 to 280	2800	N67-280	6-Cyl 6.7 Litre TCI	£20,568	£15,837
Electronic governor for genset					£790
The following engines are also available for UK sales only
HP range	Max RPM	Model	Description	List Price	Our price
115 to 230	3500 to 4000	S30E-230	4-cyl 3 litre TCI	P.O.A.	P.O.A.
170 to 250	2800	N40E-250	4-cyl, 4 litre TCI	P.O.A.	P.O.A.
270 to 370**	2800	N60E-370	6-Cyl 6.0 litre TCI	P.O.A.	P.O.A.
270 to 400	3000	N60E-400	6-Cyl 6.0 litre TCI	P.O.A.	P.O.A.
350 to 450	3000	N67E-450	6-Cyl 6.7 litre TCI	P.O.A.	P.O.A.
450 to 570	3000	N67E-570	6-Cyl 6.7 litre TCI	P.O.A.	P.O.A.

N67-280

F.P.T. Engine specifications.

Prices quoted are for marinised engines, ready to install, but certain items from the OPTIONS list are essential requirements to ensure safe and reliable operation of the engine, and allow the engine to be registered for warranty. These include Instrument panel and harness (which incorporates certain alarm and safety features), an appropriate exhaust outlet wet or dry.

There is a questionnaire that needs to be filled in by the installation engineer to register the engine for F.P.T. warranty.

All engines will require suitable coupling parts to connect on to the chosen transmission system, and prices for these parts for common gearboxes are shown.

Insulation of Earth Return Engines

Method A

Order the insulated return electrics as listed

Method B

Order the following;

Insulate return fuel pump solenoid - £85

Insulated return alternator - from £217

Ground-bridge solenoid to earth the cylinder block only whilst cracking - £25

Method C

Order:-

A.V. mounts as listed

R & D insulated flex coupling for output flange of gearbox - from £149

Insulated control cable mounts and end terminations - per engine set £29

Take care to ensure there are no remaining metal-to-metal connections from engine to the structure of the hull.

Options		N45-100	N67-150	N67-220	N67-280
Instrument panel with 7M harness, main or 2nd station	—	£900	£900	£900	£900
24V earth return Electrics	Surcharge	£399	£399	£284	—
12v Insulated return Electrics	Surcharge	£1,100*	£1,100*	£909*	— *
24V insulated return electrics	Surcharge	£1,143	£1,143	£833	—
Charge amplifier and split charger	—	£283	£283	£283	£283
Charge Split Relay	—	£17	£17	£17	£17
Exhaust outlet, wet	—	£476	£476	£600	£770
Exhaust outlet, dry	—	£254	£254	N.A.	N.A.
AV Mounts	—	£294	£294	£294	£394
PTO Pulley	—	£105	£74	£47	£60
PTO Shaft	—	£196	£196	£196	£196
Calorifier Connections	—	£47	£47	£47	£47
Flywheel Drive Plate and housing cover	For PRM	£357	£352	£364	£291
Flywheel Drive Plate and housing cover	For B/W or ZF	£400	£393	£405	£432
Gearbox oil Cooler Kit	—	£234	£234	£358	£234
Shift Cable connection kit	—	£56	£56	£56	£56
Dual station speed & shft connection	Surcharge	£58	£58	£58	£58
Boost pressure gauge & sender	Supplied loose	—	—	£59	£59
Water feed for Deep Sea seal	—	£20	£20	£20	£20
Drive belt Guard	—	F.O.C.	F.O.C.	N.A.	N.A.
Intake blockage sensor with alarm, E. or Ins. return	—	£89	£89	£89	£89
Low pressure fuel sensor with alarm	—	£92	£92	£92	£92
Part Numbers		N45-100	N67-150	N67-220	N67-280
Sea water pump		£1,145	£1,145	£1,461	£1,461
Impeller (Jabsco)		£29	£29	£47	£47
O ring impeller (3) (Jabsco)		£8	£8	£8	£8
Cover plate (Jabsco)		£18	£18	£19	£19
Screws Cover plate (Jabsco)		£4	£4	£4	£4
Cam (Jabsco)		£12	£12	£47	£47
Screw Cam (Jabsco)		£7	£7	£6	£6
Wear plate (Jabsco)		£8	£8	£8	£8
Oil Filter		£38	£38	£38	£38
Fuel Filter		£25	£25	£25	£25
Fuel Filter Pre filter		£27	£27	£27	£44
Belt		£47	£47	£47	£47
Anodes Heat exchanger		£28	£28	£28	£28
Anode Cap Heat exchanger		£10	£10	£10	£10
Starter 12 volt earth return		£303	£303	£303	£303
Air filter		£6	£6	£34	£34
Fuel Lift pump		£51	£51	£51	N/A
Gasket Rocker Cover		£13	£13	£13	£13