Lancing Marine
 
Adaptation & engineering NETT PRICES
FLYWHEEL HOUSING SPACERS THICKNESS  
SAE 1, housing bore 20⅛“ (511.2mm) 25mm £473
SAE 2, housing bore 17⅝“ (447.7mm) 25mm £410
SAE 3, housing bore 16⅛“ (409.6mm) 25mm £350
SAE 4, housing bore 14¼“ (362mm) 25mm £290
SAE 5, housing bore 13 ⅜“ (314.3mm) 25mm £235
SAE 6, housing bore 10½“ (266.7mm) 25mm £215
SAE 7, housing bore 8¼“ (209.55mm) (Borg Warner)/SAE7 10mm, 16mm, 22mm, 28mm & 32mm £76
FLYWHEEL HOUSING ADAPTERS THICKNESS  
Borg Warner/SAE7 housing to IRM220A and Twin Disc MG502 22mm £194
Borg Warner/SAE7 housing to PRM Delta 15mm £65
Borg Warner/SAE7 housing to hydraulic pump mounts 10mm £185
FLYWHEEL HOUSING rREDUCERS    
  EFFECTIVE THICKNESS       EFFECTIVE THICKNESS  
SAE 1 to SAE 2 13mm £473   SAE 2 to SAE 3 13mm £410
SAE 1 to SAE 3 13mm £473   SAE 3 to SAE 4 13mm £410
FLYWHEEL HOUSING INCREASE ADAPTORS EFFECTIVE THICKNESS  
SAE 3 to SAE 1 20mm £472
GEARBOX TO SHAFT COUPLING ADAPTORS AND SPACERS
GEARBOX FLANGE, SIZE & TYPE TO SHAFT FLANGE SIZE & TYPE   # THICKNESS  
4“ Borg Warner 4“ Borg Warner AB 49 10, 15, 20, 25, 30, 35 & 40mm £70
4“ Borg Warner 5“ Borg Warner RD 351 52.4mm £45
5“ Borg Warner 5“ Borg Warner AB 59 10, 15, 20, 25, 30, 35 & 40mm £80
5“ Borg Warner 1350/1410 Hardy-Spicer LM 2196 12mm £85
4¾“ IRM220A 6“ PRM RD 148 55.4mm £123
5“ Borg Warner 6“ PRM RD 411 55.4mm £123
5¾“ Twin Disc or 6“ PRM 5¾“ Twin Disc or 6“ PRM AB 69 10, 15, 20, 25, 30, 35 & 40mm £107
6“ PRM 5“ Borg Warner Ð   52mm or 25mm £125
7¼“ PRM 6“ PRM or 5“ Borg Warner Ð   25mm £180
Alter adaptor or coupling spigot from male to female         £60
Spigot to convert any female coupling to male         £30
Many other adaptors available on request         P.O.A.
Machining & engineering facilities
   
MACHINING CAPABILITIES
 
LATHES
Max tube or Shaft diameter if more than 48" long 2¾"
Max tube diameter if less than 48" long 8"
Max diameter mounted to face plate 27"
SLOTTING
Max stroke 4" long, ½" wide
SURFACE GRINFING
Steel 5" wide x 12"long magnetic base
GEAR CUTTING
Straight cut, helical & spiral, splining & broaching
 
 
MILLIMG
Universal mill with 48" bed
“2D” mill for accurate x-y and rotational work
DRILLING
Pillar drill
4 spindle production drill bench
DYNO TESTING
Engine power testing up to 250HP per hour £75
WELDING
Open arc and M.I.G. for mild or stainless steel
HYDRAULIC PRESS
10 ton and 50 ton
V.A.T. extra on all prices Phone: +44 (0)1273 411765. Email: data@lancingmarine.com. Website: www.lancingmarine.com