Lancing Marine
 
Diesel engines to petrol sterndrive parts BOATBUILDER PRICES
FLYWHEEL ADAPTATIONS BOATBUILDER
Flywheel ring for XLD with own Mercruiser/OMC coupling fitted £219
Flywheel weight plate for 6.2 Chevrolet diesel for Mercruiser or Volvo £323
Flywheel adaptor, FSD to Mercruiser or OMC coupling, crankshaft fixing type £230
Flywheel driveplate spacer blocks for FSD drive plate (3) £45
Modify own BMW drive plate to fit FSD bolt pattern £80
Flywheel drive plate, Volvo spline, 12", 1.9hp/100rpm ‘AM‘ £102
Flywheel drive plate, Volvo spline, 12", 3.8hp/100rpm ‘AG‘ £132
Flywheel drive plate spacers, set of 6, 10mm to 30mm long for Chevrolet diesel £102
Spigot bush for XLD engine to accept Volvo primary shaft £20
Spigot shaft extension FSD, for Volvo B20/B23 4 cylinder primary shaft £38
BELL HOUSING ADAPTATIONS
Engine backplate, XLD to Chevrolet, Volvo B20 orVolvo B23 pattern bell housings £352
Engine backplate, Peugeot XUD to Volvo B23 pattern housing £352
Flywheel housing adaptor, FSD to Volvo 4 cylinder bell housing £433
Flywheel housing adaptor, FSD to Chevrolet pattern housing £330
Modify own Volvo or BMW flywheel housing and weld to  
Borg-Warner/SAE7 housing or spacer ring £168
Borg-Warner/SAE7 flywheel housings for most popular engines See page 33 & 37
Modify ex-vehicle aluminium flywheel housing to SAE7 £475
Flywheel housing spacer kit Chevrolet 6.2 diesel to Volvo V-8 bell housing £168
EXHAUST PARTS  
Exhaust injection With 2" (51mm) vertical down outlet, for FSD £416
outlet, hi-rise or with body pointing sideways for XLD £416
Transom-mount exhaust outlet and rubber flap for 3" hose TRCPV £62
2" (51mm) to 3" (76mm) adaptor duct, straight £56
2" (51mm) to 3" (76mm) adaptor duct, elbow £56
3" (76mm), 3½" (90mm) OR 4"(102mm) alum hose plug £12
Blanking plate for exhaust connection Volvo 200-280 or 290 drive. £53
MISCELLANEOUS PARTS
Relay and wiring diagram for connection of Mercruiser and OMC shift micro-switch £16
T-piece and nipple, with ¼" or 5/16" (8mm) return connection £15

 

Whilst every effort is made to ensure the compatibility of engines and parts with existing installations, there may be variations that we do not fully appreciate. If any parts are found to be incompatible, we will do our best to exchange them for other more suitable parts, at the lowest possible cost. Should this prove to be impossible, then we will refund the cost of equipment returned in good condition, though we are obviously not able to undo modification work done on client’s own equipment.
Propeller and gear ratio change costs are not included in our prices.
Advice given on boat performance is based on information available at the time, and is not guaranteed.

FSD hi-rise exhaust XLD hi-rise exhaust
XLD steel plate to Volvo FSD housing to Chevrolet
Exhaust duct 2" to 3" elbow
Exhaust duct 2" to 3" offset Volvo 290 exhaust blanking plate
FSD Flywheel driveplate spacers and bolts
V.A.T. extra on all prices Phone: +44 (0)1273 411765. Email: data@lancingmarine.com. Website: www.lancingmarine.com