Diesel engines to petrol sterndrive parts
Flywheel ring for XLD with own Mercruiser/OMC coupling fitted
Flywheel ring for XLD to accept new Hy-drive damper plate
Flywheel ring for XLD with own J-type input shaft welded on
Flywheel weight plate for 6.2 Chevrolet diesel for Mercruiser or Volvo
Flywheel adaptor, FSD to Mercruiser or OMC coupling,
crankshaft fixing type
Flywheel driveplate spacer blocks for FSD drive plate (3)
Modify own BMW drive plate to fit FSD bolt pattern
Flywheel drive plate, Volvo spline, 12", 1.9hp/100rpm “AM”
Flywheel drive plate, Volvo spline, 12", 3.8hp/100rpm “AG”
FSD hi-rise exhaust
XLD hi-rise exhaust
Flywheel drive plate spacers, set of 6, 10mm to 30mm long for
Chevrolet diesel
Spigot bush for XLD engine to accept Volvo primary shaft
Spigot shaft extension FSD, for Volvo B20/B23 4 cylinder primary shaft
Engine backplate, XLD to Chevrolet, Volvo B20 or
Volvo B23 pattern bell housings
Engine backplate, Peugeot XUD to Volvo B23 pattern housing
Flywheel housing adaptor, FSD to Volvo 4 cylinder bell housing
Flywheel housing adaptor, FSD to Chevrolet pattern housing
Modify own Volvo or BMW flywheel housing and weld to
XLD steel plate to Volvo
FSD housing to Chevrolet
Borg-Warner/SAE7 housing or spacer ring
Borg-Warner/SAE7 flywheel housings for most popular engines See page 37
Modify ex-vehicle aluminium flywheel housing to SAE7
Flywheel housing spacer kit Chevrolet 6.2 diesel to
Volvo V-8 bell housing
Exhaust injection
With 2" (51mm) vertical down outlet, for FSD
outlet, hi-rise
or with body pointing sideways for XLD
Transom-mount exhaust outlet and rubber flap for 3" hose TRCPB
Exhaust duct 2" to 3" elbow
2" (51mm) to 3" (76mm) adaptor duct, straight
2" (51mm) to 3" (76mm) adaptor duct, elbow
3" (76mm), 3½" (90mm) OR 4"(102mm) alum hose plug
Blanking plate for exhaust connection Volvo 200-280 or 290 drive.
Relay and wiring diagram for connection of Mercruiser and
OMC shift micro-switch
T-piece and nipple, with ¼" or 5/16" (8mm) return connection
Exhaust duct 2" to 3" offset
Volvo 290 exhaust blanking plate
Single-point front mount bracket and rubber for FSD
Pair of front mounting adaptors for FSD to OMC pre-Cobra
Whilst every effort is made to ensure the compatibility of engines and parts with
existing installations, there may be variations that we do not fully appreciate. If
any parts are found to be incompatible, we will do our best to exchange them
for other more suitable parts, at the lowest possible cost. Should this prove
to be impossible, then we will refund the cost of equipment returned in good
condition, though we are obviously not able to undo modification work done on
client’s own equipment.
Propeller and gear ratio change costs are not included in our prices.
Advice given on boat performance is based on information available at the time,
and is not guaranteed.
FSD Flywheel driveplate spacers and bolts
V.A.T. extra on all prices
Phone: +44 (0)1273 411765. Email: data@lancingmarine.com. Website: www.lancingmarine.com